BC-100HS is a HDMI-to-SDI converter that has waveform/vectorscope, audio level display, video/audio pattern generator, etc.
Monitoring Features Included
Not simply converts the signal itself, but reproducing it with analysis display such as waveform and test patterns such as RP-219.
Accurate Clear Conversion
By the meticulous tailoring as same as BON monitors, users can watch clear pictures without delay or noise.
Small, Light, Foolproof Design
It's easy to place on the table or back of the monitors. It has resistance against collision and safe from turning power off by mistake.
• Full HD HDMI-to-SDI Conversion
• External Audio Output (Stereo Jack)
• Waveform (Single/Parade)
• Signal Status Display
• Video Test Pattern Generator (Color Bars, RP219, etc.)
• Audio Test Pattern Generator (1 to 4kHz)
• Tripod Hole on the Bottom
• Up to 8Ch HDMI Embedded Audio
1 x HDMI HDMI, (with HDCP v.1.1), 19pin Female
1 x Audio In Audio Input Port (Stereo 3.5 pi)
2 x SDI BNC Port
HD 1920x1080 60p/59.94p/50p
1920x1080 60i, 59.94i, 50i, 30p, 29.97p, 25p, 24p, 23.98p
1280x720 60p, 59.94p, 50p
SD NTSC, PAL
1x mini USB for Firmware Update
2x LED Power/Battery, Signal Lock
2 x Rotary Switch Function, Mode Change
1 x Tact Switch Selection Switch
Power Requirement 4DC (7V~24V) or AC Adapter(100 ~ 230V, 50Hz/60Hz)
Power Consumption 6W
Operation Temperature -10°C ~ 40°C (14°F ~ 104°F)
Operation Humidity 20% ~ 80% RH
Dimensions(WxHxD) Main Body : 84 x 117.2 x 34.5(mm) / 3.3 x 4.6 x 1.3 (inch)
Accessories Power Cable, Manual CD, AC Adapter
Options D-Tap Power Cable, Pouch & Bag, DV Battery Mount, Tripod Support, 1RU Rack Mount Kit(x3)
※ These specifications are subject to change without prior notice.