BC-100SH is a SDI-to-HDMI converter that has waveform/vectorscope, audio level display, video/audio pattern generator, etc.
Monitoring Features Included
Not simply converts the signal itself, but reproducing it with analysis display such as waveform and test patterns such as RP-219.
Accurate Clear Conversion
By the meticulous tailoring as same as BON monitors, users can watch clear pictures without delay or noise.
Small, Light, Foolproof Design
It's easy to place on the table or back of the monitors. It has resistance against collision and safe from turning power off by mistake.
• Supports 3G SDI (Level A/B)
• Time Code Display (LTC, VITC1, VITC2, DVITC)
• De-embedded 2~16Ch Audio Level Meters (Horizontal/Vertical)
• External Audio Output (Stereo Jack)
• Auto Detects SD/HD/3G SDI
• Waveform (Single/Parade)
• Signal Status Display
• Video Test Pattern Generator (Color Bars, RP219, etc.)
• Audio Test Pattern Generator (1 to 4kHz)
• Tripod Hole on the Bottom
• Up to 8Ch HDMI Embedded Audio
1 x BNC HD/SD-SDI, 3G/1.485G/270M
1 x BNC SDI Loop-Through
1 x HDMI HDMI, (with HDCP v.1.1), 19pin Female
HD 1920x1080 60p/59.94p/50p
1920x1080 60i, 59.94i, 50i, 30p, 29.97p, 25p, 24p, 23.98p
1920x1080 (30psf, 29.97psf, 25psf, 24psf, 23.98psf) 1280x720 (60p, 59.94p, 50p)
SD NTSC, PAL
1x mini USB for Firmware Update
2x LED Power/Battery, Signal Lock
2 x Rotary Switch Function, Mode Change
1 x Tact Switch Selection Switch
1x Audio Out External Audio Output
Power Requirement DC (7V~24V) or AC Adaptor(100 ~ 230V, 50Hz/60Hz)
Power Consumption 6W
Operation Temperature -10°C ~ 40°C (14°F ~ 104°F)
Operation Humidity 20% ~ 80% RH
Dimensions(WxHxD) Main Body : 84 x 117.2 x 34.5(mm) / 3.3 x 4.6 x 1.3 (inch)
Accessories Power Cable, Manual CD, AC Adapter
Options D-Tap Power Cable, Pouch & Bag, DV Battery Mount, Tripod Support, 1RU Rack Mount Kit(x3)
※ These specifications are subject to change without prior notice.